The lovely mobiles by Mark Davis.

No Bullshit. Just Sailing - NBJS

Erik Aanderaa does a great job with these videos. He tells us a great story. And he does it in perfect production and editing. Hats off. I think this will fly.

Arpex Improvement Opportunities on the Main

There is one thing, which I would like to improve on Arpex, and I am not sure how to. It is the main-halyard arrangement. Arpex uses a wharram-style softwing sail, with a short gaff on the top. The halyard goes down from the top, through the gaff, and then through the mainsail sleeve.

the issue with the arrangement, is that there is quite a bit of friction in the system, and hoisting the main can be quite an effort. I usually have to winch the final 2 meters up the mast. And it is not such a big and heavy sail. The problem is the friction. I would love to have an arrangement which makes it a bit less of an effort to hoist the main. .... But I am not sure on haw to do it.

Plans for Range Extension

It has been a while now, that I have been making plans for an overnight sail on Arpex. Some of the items on my To-Do List, prerequisites for a longer sail, was the checking of the electric wiring, to get the navigation lights back to work. This I could do recently, with the good help of  young chap, who was equipped with a Voltimeter, and knows his ways with the tricks of electricity. Which is a field where I still have lots to learn. Well, this is done now.

Now I just need to get the netting done for the bow area... But that is not a hard necessity to go. I also have a stove, to get some hot meal, and a coffee,... So now all I need is a free weekend with favorabe weather.

New Seat?

I am considering to install a private seat inside the cabin of arpex. It is supposed to serve as a porta-potti. Advantage would be the modern, gravity feed dumping system, which would be smell free, and eliminate the need for maintenance. However, I do dread to cut the hull side to allow the direct disposal of waste .

Getting Comfortable

For the first time I tried the new gas stove, for preparation of a hot tea, and a hot meal. A wonderful treat before a quiet night on Arpex. It worked wonderfully. The arrangement is convenient also because it does not heat the cabin due to generous ventilation. And the stove's ceramic fire plate efficiently radiates the heat, while producing a very wind resistant flame.

Inside Arpex

A short clip from last weekend's wonderful sailing. Arpex was sailing at 3-4 knots in maybe 4-6 knots of wind, going upwind. Note how the boat is happily sailing itself, on a steady course. The scenery of the Rio de Janeiro Bay is just amazing. 

Heavy Swell at Urca

This weekend heavy swell has entered the Guanabara Bay. It has also affected our mooring site at Urca Beach, where several boat have been ripped of from their moorings by breaking waves. In my opinion it should lead to a risk assessment of those who placed their moorings in high risk areas. In regular intervals winter storms can bring these swells in again.

At the Boat-Wash

 Yesterday it was a good day for a good washing of the boat. THe deck was properly soaped and washed with sweet water from a pressure hose. This helped the ant-skid to a bright new, clean look.

Planned Range

Arpex is well sailed by now. Some aspects of the fit-out have slowly evolved over the last four years. Like the addition of the "bowsprit", with anchor holder and cleats, additional cleats and cam-cleats on the deck, the bimini shelter, the rear net between the hulls, the kitchen table, the burner stove... many little things, that make the sailing better, and improve the capabilities for an overnight trip.

What I still need to do,is to solve the electrical issues, and put the navigation lights to work again. That is the most important. I do not like to sail Arpex in the dark without lights. Also relevant is the finishing of my forward trampolin, which will improve safety and comfort on the bow. I am well advanced with that. I am also looking at the possibility to install an inside "toilet". A gravity feed installation, that will be totally smell free, and trouble free. Just need the courage to cut the hull side. I have already cut the wood for that. 

The trip to Paquetá should be a weekend trip, with overnight at the Paquetá Boat Club. The Club traditionally welcomes visitors.

Sailing out

Arpex Sailing Range - until now 2019

Arpex hasn't yet stretched its legs very much. Since the usual sailing day is short for me, I also do not get very far from my evening shelter, at the mooring. I think the average sailing time is between 2 to 3 hours. Maybe 4, at maximum.... So I don't get to sail many miles more than about 20 in a day. Since the wind is usually between 5-8 knots, therefore boatspeed is usually between 4-8 knots.

I'd love to extend this range. For that I want to install the forward trampolin, But in fact anytime I could go sailing to Ilha Paquetá for an overnight stay. One day to go there, and the other to come back. A weekend would do.

Arpex sailing past Cotunduba Bay

Arpex on the Guanabara Bay

Arpex Sailing Mai 2019

Due to a forecast of strong winds, and uncertain weather, I had planned for a maintenance morning, Which I managed to do, despite a brilliant sunshine weather, and an inviting light breeze. But at 3, with two good hours of sunlight, I decided to go for a quick sail across the bay. With a freshly scrubbed hull bottom, Arpex sailed nicely in the light breeze of 4-8 knots, making up to 7,8 knots at in a gust. But usually cruising at 4-6 knots, and tacking reliably, even in the slow conditions.

Winter Maintenance Jobs

 After a year of fussing around and waiting, I could finally install the rear netting, which protects the stern deck area. Having stuff falling on deck, and from there into the drink, was a constant worry on Arpex. Well, not a WORRY,... but a concern. Specially sheets and halyards, which could jam the propeller, if the engine was to be used. It happened once. At least in the rear this is more difficult now. Next step is to get that for the front part.

 Adjusting the net was quite a challenge, and mounting it took a while too. The gap between the two parts of the net, is there to accommodate the Torqueedo engine. The hook, dangling within the gap, is used to secure the propeller and shaft of the engine in a high and dry position. And dragg free.

I also managed to lower the boom a little bit, by opening the mainsail sleeve. 

Many maintenance jobs still need to be tended to. Most urgent is to get the boat out of the water, to paint the bottom. The constant concern with crapping the hull is tiresome, and it wears on the hull. However, getting the boat out is not so simple. There is no ramp close by, to do such a job.

A Proa is Good!

That is a lovely video. Good job. Russ'es work, specially JZerro, inspired me so much. ... I wish I had such design and boat construction skills. Such advanced workmanship. I didn't achieve anything comparable. But I tried.

Change - Associação dos Velejadores da Urca

After 3 years ahead of the Associação dos Velejadores da Urca, I have not put myself available re-election this year. I need to focus on other things. I was a good time. I can only hope that my successors continue the work, and strengthen the bond between members.